Blown-In Insulation in Fort Lauderdale, FL
The fastest, most affordable way to bring a Fort Lauderdale attic up to Florida code R-38. Cardinal blows fiberglass or cellulose to a uniform depth across the attic floor — filling every gap batts miss in the city's waterfront estates and Intracoastal homes, in a single day, with FLIR proof before you pay.
Get Your Free Quote
Itemized pricing by zone, back to you within the hour. No call required.
Your Fort Lauderdale blown-in insulation crew.
If you searched "blown in insulation Fort Lauderdale," you're already in our service area. A local crew — never subs — covering every Fort Lauderdale neighborhood and ZIP.
Every Fort Lauderdale neighborhood. Sealed.
If you searched "blown in insulation near me in Fort Lauderdale," you're already in our service area. A local crew — never subs — covering every neighborhood and ZIP below.
Historic waterfront estates — minimal-invasion blown-in that preserves original plaster while sealing the envelope.
Established homes — blown-in top-ups that restore full R-value and cut cooling costs.
Intracoastal island homes — blown-in that locks out humidity while staying breathable.
Country-club homes — zone-by-zone blown-in that evens temperatures across the wings.
Intracoastal estates — moisture-resistant fiberglass blown-in for salt-air exposure.
Established homes — blown-in to R-38 that fixes the upstairs-downstairs imbalance.
Waterfront homes — blown-in engineered for direct Intracoastal humidity and sun.
Residential — blown-in that holds 72° inside under full South Florida sun.
Built for Fort Lauderdale's waterfront estates and Intracoastal homes.
Fort Lauderdale is the Venice of South Florida — miles of Intracoastal waterfront, deep-water estates, and historic neighborhoods running from Rio Vista to the Las Olas Isles. Harbor Beach and Las Olas Isles sit on the Intracoastal with salt-air humidity attacking under-insulated attics. Rio Vista and Victoria Park carry 1920s–40s homes built with little to no attic insulation and original plaster that can't be disturbed. And Coral Ridge, Imperial Point, and Poinsettia Heights run the AC nonstop on large waterfront attic volumes with uneven cooling across the wings.
Blown-in insulation is the cleanest answer for Fort Lauderdale's waterfront mix. It fills the irregular, hard-to-reach rooflines of historic Rio Vista homes without touching original plaster or trim — a minimal-invasion retrofit that historic-district homeowners specifically request. It's the lowest installed cost per R-value of any insulation, which matters when a large Fort Lauderdale estate attic needs a full blow from scratch. And moisture-resistant fiberglass blown-in stands up to the Intracoastal humidity in Harbor Beach and Las Olas Isles that would degrade lesser material.
What we install in Fort Lauderdale attics
- Blown-in fiberglass (Owens Corning ProPink L77) to a uniform R-38 depth — our default for Fort Lauderdale's humid attics.
- Blown-in cellulose where density and fire resistance matter more than moisture — recommended per home after a FLIR inspection.
- Attic top-ups to bring compressed or under-filled attics up to Florida code R-30 to R-38.
- Air-sealing first — we seal penetrations before we blow, so the insulation actually performs at its rated R-value.
The Fort Lauderdale difference
Every Fort Lauderdale blown-in job starts with a free FLIR thermal inspection and ends with a post-install infrared proof report — you see the sealed coverage in thermal imaging before you ever pay the balance. We run a 10-point inspection the industry skips, we keep a dedicated Broward County crew so scheduling lands same-week, and every install carries a lifetime workmanship warranty. Most Fort Lauderdale homeowners recover the cost in 3–5 years on FPL savings alone.
See what blown-in actually saves.
Move the sliders to match your West Palm Beach attic. We model annual conductive heat gain through your ceiling and convert it to real FPL cooling dollars — comparing your current attic, standard fiberglass batt, and Cardinal's blown-in R-38.
Model uses South Florida cooling-degree-hours, SEER-14 AC efficiency, and FPL's ~$0.14/kWh rate. Actual savings vary with duct leakage, radiant gain, and occupancy.
Annual cooling cost through your ceiling
Lock in your exact savings.
This model is conservative — pair blown-in with a radiant barrier for the full Cardinal Shield and up to 37% total reduction. Get an itemized quote by ZIP, no call required.
The right R-value for a Boca Raton attic.
Florida code requires R-30 minimum, but we recommend R-38 for Boca Raton's cooling load and intracoastal sun exposure. We blow to a uniform depth and measure at multiple points so you have proof your attic meets or exceeds code.
| R-Value | Tier | Fiberglass depth | Cellulose depth | Boca Raton context |
|---|---|---|---|---|
| R-30 | Florida code minimum | 11" | 8.5" | Meets Florida Building Code for attic insulation — the baseline for Boca Raton homes. |
| R-38 | Recommended for Boca Raton | 14" | 11" | Our standard blow for Boca's cooling load and intracoastal sun exposure. Best ROI tier. |
| R-49 | Premium / deep attic | 18" | 14" | For Boca country-club homes with deep attic volumes chasing maximum efficiency. |
Depth verified
We measure blown-in depth at multiple points across the attic — not a visual guess.
FLIR proof
Post-install infrared scan confirms uniform coverage before you pay the balance.
Over-spec'd for settling
We over-spec depth to absorb any settling so your R-value holds for the life of the home.
Installed to the standards the government sets.
Every Cardinal blown-in install is specified to the guidance issued by the U.S. Department of Energy, ENERGY STAR, and the Florida Building Commission — the three bodies that define how a South Florida attic should be insulated. We don't guess at R-value. We install to code, document it, and prove it in thermal imaging.
R-30 to R-60 for South Florida attics
The DOE recommends R-30 to R-60 of attic insulation for homes in DOE Climate Zone 1 (South Florida), noting that proper insulation is one of the most cost-effective ways to improve energy efficiency and comfort. Cardinal blows to R-38 — the midpoint of the DOE's recommended range for our climate.
DOE — Blown-In & Loose-Fill InsulationUp to 15% savings on heating & cooling
ENERGY STAR recommends R-30 to R-60 for Florida attics and reports that sealing air leaks and adding insulation can save homeowners up to 15% on heating and cooling costs — and up to 37% when paired with a radiant barrier in South Florida's climate. Cardinal air-seals before every blow so insulation performs at its rated R-value.
ENERGY STAR — Seal & InsulateR-30 ceiling minimum in the Florida Building Code
The Florida Building Commission administers the Florida Building Code, which sets a minimum ceiling insulation value of R-30 for residential construction in South Florida. Cardinal installs to or above code on every job — and documents compliance with a depth-measurement and FLIR proof report before you pay the balance.
Florida Building Commission — FBCThe Cardinal standard exceeds all three.
We air-seal before we blow, install to R-38 (above the R-30 code floor), document depth at multiple points, and deliver a FLIR thermal proof report — so you can see the install meets DOE, ENERGY STAR, and Florida Building Code guidance before you ever pay the balance.
Four steps. One day. FLIR proof.
FLIR attic scan
We map every void, gap, and compressed batt in infrared before we touch a thing — so we blow only where it actually helps your Fort Lauderdale home.
Prep & air-seal
We seal penetrations, mask fixtures, and protect the living space. A clean attic floor is prepped for a uniform depth blow.
Blow to R-38
Fiberglass or cellulose blown to a uniform R-38 depth across the attic floor, filling every gap batts miss. Most Fort Lauderdale homes done in a single day.
Depth + FLIR proof
We measure depth at multiple points and re-scan in infrared to confirm coverage. You get a proof report before you pay the balance.
The numbers that matter.
Lowest installed cost per R-value of any insulation — ideal for Fort Lauderdale's waterfront estates and Intracoastal homes.
Fills gaps and voids that batts miss in the irregular rooflines of Rio Vista and Victoria Park historic homes.
Fast installation — most Fort Lauderdale attics done in a single day by a local Broward County crew.
Moisture-resistant fiberglass blown-in stands up to Intracoastal humidity in Harbor Beach and Las Olas Isles.
Top up existing insulation to meet Florida code R-30 to R-38 on Imperial Point and Poinsettia Heights homes.
Cuts cooling costs 15–25% on under-insulated Fort Lauderdale attics — up to 37% paired with a radiant barrier.
Honest pricing by ZIP code.
Pricing factors that drive your Fort Lauderdale quote: attic square footage, target R-value (R-30 vs R-38 vs R-49), material (fiberglass vs cellulose), and whether we're topping up or starting fresh. Every quote is itemized — no call required.
Rio Vista, Las Olas Isles — historic and intracoastal waterfront estates.
Coral Ridge, Victoria Park, Wilton Manors — established and intracoastal homes.
Poinsettia Heights, Victoria Park — residential family homes.
Imperial Point, Coral Ridge Country Club — country-club and waterfront homes.
Harbor Beach, Rio Vista Isles — deep-water intracoastal estates.
Every quote is itemized by ZIP code and square footage — no call required. Pair blown-in with a radiant barrier for the full Cardinal Shield and savings up to 37%.
Proof of expertise, not promises.
The materials we blow into Boca Raton attics and the certifications behind every install. This is the expertise behind our 5.0-star rating on Google.
Materials we install
Our default blown-in for Boca Raton — and the material we are a certified Owens Corning installer for. Moisture-resistant, low-settling, and rated R-2.2–R-2.7 per inch — ideal for intracoastal humidity in Royal Palm Yacht Club and The Sanctuary.
Denser and more fire-resistant than fiberglass. We recommend it per home after a free FLIR inspection where density and sound dampening matter most.
Paired with blown-in for the full Cardinal Shield — reflects up to 97% of radiant heat gain on Boca's full-sun rooflines.
Certifications & warranties
Owens Corning Certified Installer
Cardinal is a certified Owens Corning installer. Our blown-in attic specifications use Owens Corning ProPink fiberglass, installed to the manufacturer's certified depth and density standard.
FLIR-Certified Thermographers
Every Boca Raton job starts and ends with a certified infrared scan — the proof most crews skip.
Licensed & Insured FL Contractor
Fully licensed and insured for insulation work across Palm Beach County — Boca Raton to West Palm Beach.
Lifetime Workmanship Warranty
Every blown-in install we touch carries a lifetime workmanship warranty — transferable to the next owner.
Blower-Door Air-Seal Verification
We seal before we blow and verify the envelope with a blower-door test so insulation performs at its rated R-value.
Every Boca Raton install is documented with a before-and-after FLIR infrared proof report — you see the sealed coverage in thermal imaging before you pay the balance.
A different category
of contractor.
We don't compete on price. We compete on the 15-point standard the industry skips — from FLIR thermal imaging to Building Scientist verification. Here's where the barrier falls.
No competitor named. The standards speak for themselves.
We put the risk on us, not you.
The barrier between you and comfort shouldn't be money or trust. We remove both — with financing, a lifetime warranty, and proof you can see.
Lifetime Workmanship Warranty
Every seal we install is guaranteed for the life of the home. If it ever fails, we fix it free — no fine print.
Flexible Financing
Spread the cost over 12–60 months with low-interest options. Most homeowners pay less per month than they save on cooling.
Same-Week Inspection
Quote today, FLIR inspection this week. We don't make you wait to start saving.
Documented Savings
Before-and-after infrared proof. You see the sealed shield in thermal imaging before you ever pay the balance.
Ready to remove the barrier?
60-second quote. No call required. No obligation.
The highest-rated blown-in crew in Fort Lauderdale.
Reviews are the #1 map-pack ranking factor. If Cardinal sealed your Fort Lauderdale home, tell Google.
Air leaks, noise, and energy bills.
The three questions every Fort Lauderdale homeowner asks before investing in blown-in attic insulation — answered straight, with the science behind each.
Blown-in insulation resists air movement but does not fully stop it — it filters air, it doesn't seal it. That's why Cardinal air-seals every top plate, wiring penetration, and plumbing chase with foam before any insulation goes in. Skipping that step (which cheap quotes do) lets conditioned air leak past the insulation and wastes the R-value you just paid for. In Fort Lauderdale's humid climate, unsealed air leaks also carry moisture into the attic, which can compress insulation and grow mold. Our free FLIR inspection maps every leak before we blow a single bag.
Blown-in attic insulation noticeably reduces exterior and between-floor noise — typically 5–8 decibels of airborne sound transmission, which the ear perceives as roughly half as loud. Cellulose outperforms fiberglass here because its higher density absorbs more sound energy. Fort Lauderdale homeowners near I-95, Federal Highway, or flight paths report a clear difference after a blown-in top-up. It won't eliminate impact noise (footsteps, slamming doors) — that requires wall cavity insulation — but it meaningfully quiets road traffic, lawn equipment, and neighbor activity.
Topping an under-insulated attic to R-38 typically cuts cooling costs 15–25% in South Florida homes. The exact savings depend on your attic's current R-value, A/C efficiency, and duct location. If your ducts run through the attic (common in Fort Lauderdale homes built 1970–2010), the savings can be higher because the ducts now sit in a cooler space. We document the expected savings in your itemized quote and verify the install with a post-install FLIR scan so you can see the thermal difference before you pay the balance.
South Florida's climate means your A/C runs 8–10 months a year, pulling conditioned air up into the attic through every unsealed gap. Insulation without air sealing is like wearing a sweater with the zipper open — it slows heat but doesn't stop the air carrying it. In Fort Lauderdale's humidity, those same air leaks carry water vapor that can condense in the attic, wet the insulation, and grow mold. Cardinal seals every penetration first, then blows — the order matters, and it's the step that makes the R-value actually perform.
Yes, indirectly. The added density in the attic dampens low-frequency exterior noise — wind-driven rain on the roof, thunder, and distant storm activity all register quieter after a blown-in top-up. It does not structurally reinforce the roof (only closed-cell spray foam does that), but the sound-dampening effect is a consistent benefit Fort Lauderdale homeowners mention after installation. If storm resilience is a priority, ask about pairing blown-in with a radiant barrier or spray foam on the roof deck.
Fort Lauderdale homes lose the most cooling energy through the attic — the sun bakes the roof deck to 150°F+, and that heat radiates into your living space. Blown-in R-38 insulation creates a thick thermal blanket on the attic floor that slows that heat transfer, so your A/C runs less, cycles shorter, and lasts longer. The Department of Energy estimates proper attic insulation saves 15–30% on cooling costs in hot-humid climates like South Florida. We verify the improvement with before-and-after FLIR thermal imaging on every install.
The questions Boca, Delray & Boynton actually ask.
Blown-in attic insulation in Fort Lauderdale typically runs $1,500–$4,500 depending on square footage, target R-value, and whether we're topping up or starting fresh. Get an instant itemized quote by ZIP code (33301, 33304, 33305, 33308, 33316) — no call required.
We blow attic insulation across every Fort Lauderdale neighborhood — Rio Vista, Victoria Park, Wilton Manors, Coral Ridge, Harbor Beach, Imperial Point, Las Olas Isles, Poinsettia Heights — and every ZIP from 33301 to 33316. Same-week scheduling with a local crew, never subcontracted.
Yes. Blown-in is ideal for Fort Lauderdale's waterfront estates and Intracoastal homes — it fills irregular rooflines and gaps that batts miss, and we verify coverage with FLIR so nothing is left to guesswork. The install carries a lifetime workmanship warranty.
Fiberglass blown-in (Owens Corning ProPink L77) is our default for Fort Lauderdale — it's moisture-resistant and settles less, which matters where humidity runs high. Cellulose is denser and more fire-resistant but can hold moisture. We recommend per home after a free FLIR inspection.
Yes. Blown-in is ideal for topping up compressed or under-filled Fort Lauderdale attics to meet Florida code R-30 to R-38. We inspect first with FLIR to confirm the existing material is clean and dry before adding depth — we never blow over contaminated or wet insulation.
Properly installed blown-in fiberglass lasts 80+ years with minimal settling, even in South Florida humidity. We over-spec depth to account for any settling, so your R-value stays at code for the life of the home. Cellulose can settle up to 20% over time and may need a top-up down the road.
Yes. Topping an under-insulated Fort Lauderdale attic to R-38 typically cuts cooling costs 15–25%. Pair it with a radiant barrier for the full Cardinal Shield and savings up to 37%.
Same-week. We keep a dedicated local crew, so most Fort Lauderdale blown-in installs land on your calendar within 3–5 days — often faster. Most single-family attics are completed in a single day.
Only when needed. If your existing attic insulation is water-damaged, compressed, moldy, or rodent-contaminated, we remove it under negative-pressure containment first — then blow in clean material. Clean, dry, intact insulation can be topped up. A free FLIR inspection tells you which you need.
Florida code requires R-30 minimum, but we recommend R-38 for Fort Lauderdale's cooling load and sun exposure. We blow to a uniform R-38 depth and document the depth at multiple points so you have proof your attic meets or exceeds code. R-49 is available for deep attics chasing maximum efficiency.
More Fort Lauderdale insulation services.
Every insulation type, its own Fort Lauderdale page.
Serving the Boca–Delray–Boynton corridor.
From the Boca inlet to Boynton's western estates — every hot zone below is a home we sealed this year. This is our local service area.
