How much does spray foam insulation cost in Boca Raton?

Most Boca Raton homes run $3,500–$9,500 depending on square footage and scope. We give an itemized instant quote by ZIP code, and most homeowners recover the cost in 3–5 years on cooling savings.

Which areas does Cardinal Insulation serve?

We serve Boca Raton, Delray Beach, and Boynton Beach, FL — the entire tri-city corridor from the Boca inlet to Boynton's western estates.

How is Cardinal different from other insulation companies?

We run a 10-point inspection the industry skips, use local crews, quote same day, and back every seal with a lifetime workmanship warranty with FLIR proof reports.

Will spray foam lower my FPL bill?

Yes. Our sealed homes average a 37% cooling-cost reduction. Closed-cell foam plus a radiant barrier reflects up to 97% of radiant heat gain.

How fast can you inspect my home?

Same-week — usually within 3–5 days, often faster. Use the Schedule Inspection button to grab a real-time slot.

Do you work on new construction and existing homes?

Both. We engineer thermal packages for new builds and retrofit existing homes across Boca, Delray, and Boynton.

Is spray foam safe for Florida humidity and coastal homes?

Yes. Closed-cell foam acts as a moisture barrier and structural reinforcement, ideal for salt-air coastal environments.

Deerfield Beach, FL · Broward County · Zone 2A

Air Sealing in Deerfield Beach, Florida

Insulation slows heat — air sealing stops the leaks that carry it. Every Boca Raton, Delray Beach, Boynton Beach, West Palm Beach, and Parkland home leaks conditioned air through gaps around plumbing, wiring, recessed lights, attic hatches, and top plates. Cardinal finds and seals every leak with blower-door-guided air sealing, then proves the reduction with before-and-after readings. It's the single highest-ROI upgrade you can make before adding insulation.

(561) 654-7698

Get Your Free Quote

Itemized pricing by zone, back to you within the hour. No call required.

No obligation Open 24/7

Prefer to talk? (561) 654-7698

Owens Corning Certified Installer

ProPink fiberglass, installed to manufacturer spec

FLIR-Certified Thermographers

Before-and-after infrared proof on every job

Licensed & Insured — Florida

Local crews, never subcontracted

Lifetime Workmanship Warranty

Transferable to the next owner

Air Sealing for Deerfield Beach Properties

air sealing is the workhorse of Florida attic retrofits. For Deerfield Beach properties, this is frequently the right specification — but we will tell you plainly when it is not, and when a less expensive approach delivers the same outcome.

Deerfield Beach sits in South Florida, where the recommended attic target is R-38 to R-49. That number, along with where your ductwork runs and what condition the existing assembly is in, is what determines the right specification for your property.

Air Sealing at a glance

R-value: Measured in ACH (air changes per hour) — no R-value
Installed cost: $600 – $2,500 installed
Service life: Permanent (foam and caulk do not degrade)
Available in: Deerfield Beach and throughout the surrounding area

Call (561) 654-7698

Types and Methods

Blower-door-guided air sealing

We pressurize your home with a blower door, locate every leak with a smoke pencil and FLIR camera, then seal them with foam and caulk. The blower door measures the before-and-after in ACH — so you know exactly how much leakage we eliminated.

Attic-specific air sealing

Targeted sealing of the attic floor — top plates, can lights, plumbing and wiring penetrations, chases, and the attic hatch. This stops conditioned air from escaping into the attic and is the highest-ROI upgrade before adding insulation.

Air sealing should always come before insulation, not after. Insulation filters air — it doesn't block it. Sealing the leaks first, then insulating, delivers the full rated R-value. Doing it in reverse traps air in the insulation and wastes the performance.

Benefits for Deerfield Beach Property Owners

Stops conditioned air from escaping through gaps insulation can't reach.
Lowers cooling bills up to 20% on its own — before any insulation is added.
Reduces humidity and dust intrusion for cleaner indoor air.
Improves HVAC performance — your system runs less and lasts longer.
Verified with blower-door testing — you see the before-and-after numbers.

Best Applications

Homes with high FPL bills and uneven temperatures
Pre-insulation prep — seal before you insulate
Drafty homes with cold or hot spots
Homes with dust, humidity, or odor intrusion
Energy code compliance and rebate programs

How We Install It in Deerfield Beach

1Set up the blower door and pressurize the home to measure baseline ACH
2Locate every leak with a smoke pencil and FLIR camera
3Seal top plates, can lights, chases, and the attic hatch with foam
4Seal plumbing and wiring penetrations with caulk or foam
5Weatherstrip the attic hatch and exterior doors
6Re-run the blower door to measure the improvement in ACH
7Document the before-and-after readings and walk you through the results

Cost and R-Value Reference

Cost Reference

Florida insulation cost & R-value reference.

Typical installed costs across South Florida by material. Pricing varies with access, square footage, and site conditions — every Cardinal quote itemizes material, R-value, installed inches, and square footage.

Material	Installed cost	R-value / inch	Service life
Blown-in fiberglass	$1.10 – $2.00 / sq ft	R-2.2 – R-2.7 / in	20–30 years
Blown-in cellulose	$1.20 – $2.40 / sq ft	R-3.2 – R-3.8 / in	20–30 years
Fiberglass batts	$0.90 – $2.10 / sq ft	R-3.1 – R-3.4 / in	25+ years
Mineral wool	$1.60 – $3.40 / sq ft	R-3.0 – R-4.3 / in	50+ years
Open-cell spray foam	$1.50 – $3.20 / sq ft	R-3.6 – R-3.8 / in	80+ years
Closed-cell spray foam	$2.40 – $4.90 / sq ft	R-6.0 – R-7.0 / in	80+ years
Rigid foam board	$1.40 – $3.80 / sq ft	R-3.8 – R-6.5 / in	50+ years
Radiant barrier	$0.55 – $1.90 / sq ft	Reflective (no R)	25+ years
Duct sealing + R-8 wrap	$800 – $3,500 / system	R-8 (duct)	15–25 years
Insulation removal	$1.10 – $2.90 / sq ft	—	One-time

Pricing reflects typical Florida installed costs and varies with access, square footage, and site conditions. Source: U.S. Department of Energy insulation guidance, Florida Building Code R402, and IECC climate zone 1 requirements.

Pricing reflects typical Florida installed costs and varies with access, square footage and site conditions.

FAQs

Air Sealing FAQs — Deerfield Beach

Air sealing across the corridor runs $600–$2,500 depending on home size and leak severity, verified with a blower-door test before and after. It's often the highest-ROI upgrade you can make. Get an instant itemized quote by ZIP code.

Yes — insulation doesn't stop air leaks. Fiberglass and cellulose filter air; they don't block it. Gaps around wiring, plumbing, and top plates let your conditioned air escape. We seal those leaks first, then insulate — doing it in reverse traps air in the insulation and wastes the R-value.

Insulation resists heat transfer through a material; air sealing stops the actual movement of air in and out of your home. Both are needed. We use blower-door testing to find the leaks, seal them with foam and caulk, then measure the improvement — so you know exactly how much leakage we eliminated.