How much does spray foam insulation cost in Boca Raton?

Most Boca Raton homes run $3,500–$9,500 depending on square footage and scope. We give an itemized instant quote by ZIP code, and most homeowners recover the cost in 3–5 years on cooling savings.

Which areas does Cardinal Insulation serve?

We serve Boca Raton, Delray Beach, and Boynton Beach, FL — the entire tri-city corridor from the Boca inlet to Boynton's western estates.

How is Cardinal different from other insulation companies?

We run a 10-point inspection the industry skips, use local crews, quote same day, and back every seal with a lifetime workmanship warranty with FLIR proof reports.

Will spray foam lower my FPL bill?

Yes. Our sealed homes average a 37% cooling-cost reduction. Closed-cell foam plus a radiant barrier reflects up to 97% of radiant heat gain.

How fast can you inspect my home?

Same-week — usually within 3–5 days, often faster. Use the Schedule Inspection button to grab a real-time slot.

Do you work on new construction and existing homes?

Both. We engineer thermal packages for new builds and retrofit existing homes across Boca, Delray, and Boynton.

Is spray foam safe for Florida humidity and coastal homes?

Yes. Closed-cell foam acts as a moisture barrier and structural reinforcement, ideal for salt-air coastal environments.

Parkland, FL · Broward County · Zone 2A

Duct Insulation and Sealing in Parkland, Florida

The U.S. Department of Energy estimates that 20–30% of the air moving through a typical home's ductwork is lost to leaks and poor insulation. In a South Florida attic running 140°F, uninsulated or leaky ducts mean your AC is fighting a losing battle. Cardinal seals every joint with mastic, wraps ducts to R-8, and verifies the improvement with before-and-after readings — recovering the cooled air you already paid for.

(561) 654-7698

Get Your Free Quote

Itemized pricing by zone, back to you within the hour. No call required.

No obligation Open 24/7

Prefer to talk? (561) 654-7698

Owens Corning Certified Installer

ProPink fiberglass, installed to manufacturer spec

FLIR-Certified Thermographers

Before-and-after infrared proof on every job

Licensed & Insured — Florida

Local crews, never subcontracted

Lifetime Workmanship Warranty

Transferable to the next owner

Duct Insulation and Sealing for Parkland Properties

duct insulation and sealing is the workhorse of Florida attic retrofits. For Parkland properties, this is frequently the right specification — but we will tell you plainly when it is not, and when a less expensive approach delivers the same outcome.

Parkland sits in South Florida, where the recommended attic target is R-38 to R-49. That number, along with where your ductwork runs and what condition the existing assembly is in, is what determines the right specification for your property.

Duct Insulation and Sealing at a glance

R-value: R-8 (duct wrap) · Sealing measured in CFM reduction
Installed cost: $800 – $3,500 installed
Service life: 15–25 years
Available in: Parkland and throughout the surrounding area

Call (561) 654-7698

Types and Methods

Mastic duct sealing

Every joint and seam in the ductwork is sealed with fiber-reinforced mastic — a permanent sealant that hardens and flexes with thermal expansion. Unlike duct tape, which fails within months under attic temperatures, mastic lasts the life of the ductwork.

R-8 duct wrap insulation

Ductwork is wrapped in R-8 fiberglass insulation with a reflective vapor barrier, reducing heat gain through the duct walls in 140°F attics. This keeps the cooled air cooler as it travels from the AC to your living space.

The U.S. Department of Energy estimates 20–30% of conditioned air is lost through duct leaks. In a 140°F South Florida attic, uninsulated ducts also gain heat — so the air that does arrive is warmer. Sealing and insulating ducts recovers both losses.

Benefits for Parkland Property Owners

Recovers 20–30% of cooled air lost through duct leaks (U.S. DOE estimate).
Mastic-sealed joints stop air leakage permanently — tape fails, mastic doesn't.
R-8 duct wrap reduces heat gain through ductwork in 140°F attics.
Lowers AC runtime and extends equipment lifespan.
Verified with before-and-after airflow readings — you see the improvement.

Best Applications

Homes with ductwork in the attic
High FPL bills with uneven room temperatures
Duct systems over 10 years old with original tape seals
Rooms that never cool properly despite adequate AC
Post-duct-cleaning sanitizing and resealing

How We Install It in Parkland

1Inspect the ductwork for visible leaks, disconnections, and damage
2Measure baseline airflow at each register
3Seal every joint, seam, and connection with mastic — not tape
4Wrap ducts to R-8 with fiberglass insulation and a reflective vapor barrier
5Seal all boots and registers to the surrounding drywall
6Re-measure airflow at each register to verify the improvement
7Document the before-and-after readings

Cost and R-Value Reference

Cost Reference

Florida insulation cost & R-value reference.

Typical installed costs across South Florida by material. Pricing varies with access, square footage, and site conditions — every Cardinal quote itemizes material, R-value, installed inches, and square footage.

Material	Installed cost	R-value / inch	Service life
Blown-in fiberglass	$1.10 – $2.00 / sq ft	R-2.2 – R-2.7 / in	20–30 years
Blown-in cellulose	$1.20 – $2.40 / sq ft	R-3.2 – R-3.8 / in	20–30 years
Fiberglass batts	$0.90 – $2.10 / sq ft	R-3.1 – R-3.4 / in	25+ years
Mineral wool	$1.60 – $3.40 / sq ft	R-3.0 – R-4.3 / in	50+ years
Open-cell spray foam	$1.50 – $3.20 / sq ft	R-3.6 – R-3.8 / in	80+ years
Closed-cell spray foam	$2.40 – $4.90 / sq ft	R-6.0 – R-7.0 / in	80+ years
Rigid foam board	$1.40 – $3.80 / sq ft	R-3.8 – R-6.5 / in	50+ years
Radiant barrier	$0.55 – $1.90 / sq ft	Reflective (no R)	25+ years
Duct sealing + R-8 wrap	$800 – $3,500 / system	R-8 (duct)	15–25 years
Insulation removal	$1.10 – $2.90 / sq ft	—	One-time

Pricing reflects typical Florida installed costs and varies with access, square footage, and site conditions. Source: U.S. Department of Energy insulation guidance, Florida Building Code R402, and IECC climate zone 1 requirements.

Pricing reflects typical Florida installed costs and varies with access, square footage and site conditions.

FAQs

Duct Insulation and Sealing FAQs — Parkland

Duct sealing and insulation runs $800–$3,500 depending on duct length, accessibility, and whether the ducts are already insulated. Mastic sealing alone is on the low end; full sealing plus R-8 wrap is on the high end. Get an instant itemized quote by ZIP code.

Duct tape fails within months under attic temperatures — the adhesive dries out and the tape falls off. Mastic is a fiber-reinforced sealant that hardens permanently, flexes with thermal expansion, and lasts the life of the ductwork. We seal every joint with mastic, not tape.